Tanita PW-650MA Instruction Manual Download

Page: 26 / 28

is displayed

Troubleshooting

If you think your equipment is malfunctioning, check the following before ordering repairs.

Reference

page

Items to check

Issue

When using the AC adapter

Nothing is displayed
when is pressed

Blinking

Makes sure the AC adapter plug and DC jack are
connected and the plug is connected to an outlet.

When using batteries

The batteries may be dying. Insert new batteries.

The batteries are dead. Promptly replace them.

Measurement accuracy may be affected in locations with heavy

vibrations. Change the location of the product and try again.

Is the Weight Lock Mode turned off?

The maximum weight of 200k has been exceeded.

Remove everything from the platform.

(

may not always be displayed when the remaining

battery is low)

The batteries are dead. Promptly replace them.

Make sure the and on the batteries are pointed in the

correct direction inside the battery box.

Characters quickly
disappear after they
are displayed.

The display won’t lock

is displayed
during measurement

The platform and the control unit are not connected.

is displayed

when is pressed

is displayed

when is pressed

If necessa

Summary of Contents for PW-650MA





























Search results

Summary of Contents for PW-650MA

Reviews:

Related manuals for PW-650MA

Brands by name

Popular brands

Tanita PW-650MA, Instruction Manual

Search results

Summary of Contents for PW-650MA

Reviews:

Related manuals for PW-650MA

Brands by name

Popular brands