Set Your Location Code
Setting the Date and Time
Different locations across the world have different gravitational
pulls. These differences affect the accuracy of the weight
measurement. You can obtain the most accurate weight readings by
selecting the correct gravity setting on the monitor according to your
geographical location.
1.When the power is off, press and hold the
button.
2.Refer to the map enclosed, and press the
buttons to select
your location code.
3.Press the
button to enter and save the setting.
Changing the Weighing Unit
1.When the power is off, press and hold the
button for more than three seconds.
2.Use the
button to switch the weighing unit.
3.Press the
button.
Note:
If weighing unit is set to pounds or stone-pounds, the height programming mode is automatically set to feet and inches. Similarly,
if kilograms is selected, height is automatically set to centimeters.
1.Select the year using the
and
buttons.
2.Press
to confirm.
Set the day and hour in the same way.
The power automatically turns off after displaying the set region, year, month, day and time.
en
Up / Recall Button
Weight-Only / Off Button
SET
/ Communication Button
Down
/ Item Select Button
Display Screen
6
Inserting the Batteries
Note:
・
Be sure that the batteries are inserted in the correct orientation. If the batteries are
inserted incorrectly, fluid may leak from the batteries and damage the floor.
・
If you do not intend to use this unit for a long period of time, remove the batteries
before storage.
・
The included batteries from factory may have decreased energy levels over time.
Preparations Before Use
