Tanita BC-G02, Manual

Page: 7 / 24

7
en
Note:
• To change the date or time setting, press and hold the SET/M button for 3 seconds when the power is off,
and then follow the procedure above to change the data or time setting.
• If the Body Composition Monitor is not operated for 60 seconds or more, the power will turn off automatically.
Settings will not be saved in this case.
•
If you make a mistake or wish to turn the monitor off before you complete the settings, press the OFF button to
turn the monitor off. Settings will not be saved in this case.
Setting (Resetting) Date and Time
1. Set Date
Insert batteries into the monitor and then press any button
to start the Year setting. Press the Up/Down buttons to set
year and then press the SET/M button. The monitor beeps
once to confirm.
2. Set Hour
Press the Up/Down buttons to set the hour and then press
the SET/M button.
The monitor beeps once to confirm.
3. Set Minute
Press the Up/Down buttons to set the minute and then
press the SET/M button.
The monitor beeps twice to confirm the settings.
The power then shuts down automatically.