Tanita BC-G02, Manual

Page: 10 / 24

en
6. Set Your Height
The display defaults to 170cm (5’ 7.0”) (height range is from 90cm to 220cm or
3’ 0.0” to 7’ 3.0”). Use the Up/Down buttons to specify the height and then press
the SET/M button. The monitor beeps once to confirm.
The display shows the personal data once to confirm,
and then the display shows "0.0kg" (or"0.0lb", "0.0stlb") and is ready for
measurement.
Press the SET/M button to enter.
DIET: Disable
DIET
: Enable
Press the Down button or Up button to enable/disable the diet mode for females.
Press the SET/M button to enter.
Press the Down button or Up button to select the most recent menstruation
starting date.
5. Set Whether to Enable the Diet Mode for Females
7.Measuring Your Body Composition
Check “0.0kg” (0.0lb, 0.0stlb) is shown on the display,
then step on the monitor.
Registered personal data and the measurement results are
displayed in order, then the power switches off automatically.
Note: If you step onto the monitor before “0.0kg” appears,
“Err” appears in the display and readings cannot be obtained.
Furthermore, if you do not step onto the monitor within 30
seconds of “0.0kg” appearing, the power is shut-off automatically.
Please try setting and storing personal data again.
Note: Perform the following operations if you are 18 years of age or above and
have selected “Female”. Otherwise, please proceed to "6. Set Your Height".
Note: If you have disabled this mode, proceed to “6. Set Your Height.
Note: If you change the birthday and/or gender, the “CLr” appears
in the display.
Select “YES” using the Up/Down buttons to delete the existing
personal data, enabling you to register new data.
If you select “no” using the Up/Down buttons, no new data is saved
(existing data is left unchanged) and power turns off.
10