Tanita BC-G02, Manual

Page: 6 / 24

6
en
Preparations Before Use
Inserting the Batteries
Note:
・
Be sure that the batteries are inserted in the correct orientation.
If the batteries are inserted incorrectly, fluid may leak from the
batteries and damage the floor.
・
If you do not intend to use this unit for a long period of time,
remove the batteries before storage.
・
The included batteries from factory may have decreased energy
levels over time.
Positioning the Monitor
Handling Tips
This monitor is a precision instrument that utilizes state-of-the-art technology.
Follow these instructions carefully to keep the monitor in the best condition:
• Do not attempt to disassemble the monitor.
• Store the monitor horizontally, and position it so that the buttons will not be pressed accidentally.
• Avoid subjecting the monitor to excessive impact or vibration.
• Place the monitor in an area free from direct sunlight, heating equipment, high humidity, or extreme
temperature change.
• Never submerge in water. Use alcohol to clean the electrodes and glass cleaner (applied to a cloth first) to
keep them shiny. Do not use soap.
• Do not step on the monitor if it is wet.
• Do not drop any objects onto the monitor.
Note: To avoid possible injury, do not step on the edge of the monitor.
Positioning the Monitor
Place the monitor on a hard, flat surface where there is minimal vibration to
ensure safe and accurate measurement.
Automatic Shut-down Function
The automatic shut-down function shuts off the power automatically in the following cases:
• If you interrupt the measurement process, the power will shut down automatically within 30 seconds
depending upon the type of operation.
• During programming, if you do not touch any of the keys or buttons within 60 seconds.
• After you have completed the measuring process.