14
4
．
Press the key for more than 5s, you can delete all set and memory and return to the
initial state before the Robot leaves the factory.
OK key
1
．
You should press “OK” to save the set and exit Reservation Date Set after finishing
the reservation date setting.
2
．
You should press “OK” to save the set and exit Reservation Time Set after finishing
the reservation time setting.
UV lamp key
You can turn on/off UV lamp by pressing the key while the Robot is in the Standby mode
or running. The on/off set will be memorized automatically.
DOCKING Automatic
recharging
While the Cleaner is in the Standby mode or running, the Cleaner will search the Docking
Station for charging after you press the key. While the Cleaner stops running, the Cleaner
will stop recharging after you press the key again.
Forward key
Press “Forward”, the Cleaner will run forward cleaning as the arrow, press “Off” to stop.
It will stop automatically in case of the obstacle.
Backward key
Press “Backward” for long, the Robot will run backward cleaning as the arrow, and it will
stop after you release the key.
Turn left key
Press “Turn left” for long, the Cleaner will turn counterclockwise in situ, and while you
release the key, it will run forward as you expected. Press “Off” to stop the Robot. It will
stop automatically in case of the obstacle.
Turn right key
Press “Turn right” for long, the Cleaner will turn counterclockwise in situ, and while you
release the key, it will run forward as you expected. Press “Off” to stop the Robot. It will
stop automatically in case of the obstacle.
:
1.
You should use the remote control within 10m (radio signal scope), or you may fail to control the main body.
2.
The Cleaner may fail to find the Docking Station due to the obstacle, complex condition or because the battery was
used out while you press Auto charging.
Auto Charging Docking Station
The Docking Station Display and Control Panel
Overall Display
Function Instructions
1
．
LED decorative light (a little essence can be placed above)
2
．
Decorative light switch
3
．
Power LED
4
．
Charging indicator
5
．
Signal transmitting
6
．
Charging positive electrode
7
．
Charging negative electrode
8
．
Charging power DC socket
Using Method & Functional Status of the Docking station
No.
Function Guide
Function Information
