4
INSTALLATION
• Carefully remove all parts from the packaging.
• Do not discard the packing materials until you have carefully.
inspected the machine, identified all loose parts, and satisfactorily
operated your machine.
CAUTION: Heavy machinery,
please carry with both hands to avoid injury.
• Place Screw Alignment Templates on workbench or stand and
drill 4 holes where indicated.
• Mount the machine onto the surface (hardware not included).
We recommend using 1/4" or 6 mm bolts and add corresponding
washer and nuts to secure the machine into place.
Fig. 2
WARNING: Do not operate machine until it is
properly secured to a work surface. The entire
machine base must be in contact with the table
surface. Do not suspend the front of the machine
off the table.
• Insert handle onto the press, slightly compressing the ram, and
tighten the socket head bolt.
Fig. 3
• Slide the table plate into the base and tighten table handle.
Fig. 4
Fig. 2
Fig. 3
Fig. 4
