4
General Instructions
Installation:
Note: Before installing valve, flush
out all supply lines.
1. Screw no.
1
onto bottom of existing
supply piping, use Teflon tape or pipe
joint compound on threads.
No.
2
should face towards front.
3. Connect no.
6
to no.
7
, use Teflon
tape on threaded end of no.
6
.
2. Screw no.
3
into opening of no.
4
,
use Teflon tape (
Do Not Use
Loctite
on threads, as no.
3
may need to be
replaced at a later date.)
1
2
close view of
no.10
installation
8”
existing piping
supplied by others
3
4
13
11
10
12
6
10
4. Mount no.
10
to wall
(in a
convieneint location)
with no.
12
and
no.
13
, or other appropriate means.
No.
11
is provided by T&S Brass
6
5. Turn on water supply and check
for leaks.
7
Note: T&S recommends install-
ing the B-0110 wall brackets
supplied with this model.
