background image

Installation and 

Installation and 

Maintenance

Maintenance

Instructions

Instructions

Limited One Year Warranty

Equip warrants the original purchaser (other than 

for purposes of resale) that such product is free from 
defects in material and workmanship for a period 
of one (1) year from the date of purchase.  During 
this warranty period, if the product is found to be 
defective, equip shall, at its option, repair and/or 
replace it.  To obtain warranty service, products 
must be returned to:

            Equip Foodservice Accessories
            Attn:  Warranty Repair Department
           P.O. Box 1088, 2 Saddleback Cove
            Travelers Rest, SC 29690

Shipping, freight, insurance, and other 

transportation charges of the product to equip and 
the return of repaired or replaced product to the 
purchaser are the responsibility of the purchaser.  
Repair and/or replacement shall be made within 
a reasonable time after receipt by Equip of the 
returned product.  This warranty does not cover 
items which have received secondary finishing or 
have been altered or modified after purchase, or 
for defects caused by physical abuse to or misuse of 
the product, or shipment of the products.
  Any express warranty not provided herein, and 

 

P/N:  098-015286-45  Rev.3

 Date: 

08-18-15

 Drawn: 

TEH

 Checked: DMH 

11-19-15

 Approved:  JHB 11-25-15

any remedy for Breach of Contract which might 
arise, is hereby excluded and disclaimed.  Any 
implied warranties of merchantability or fitness 
for a particular purpose are limited to one year in 
duration.  Under no circumstances shall Equip be 
liable for loss of use or any special consequential 
costs, expenses or damages.
  Some states do not allow limitations on how 
long an implied warranty lasts or the exclusion 
or limitation of incidental or consequential 
damages, so the above limitations or exclusions 
may not apply to you.  Specific rights under this 
warranty and other rights vary from state to state.

Attention California Residents:

“WARNING: This product contains chemicals 

known to the State of California to cause cancer, 
and birth defects or other reproductive harm.” 

Español:

Instrucciones de instalación y mantenimiento

Mandarin:  

安装与维护说明

EQUIP
TOUCH-FREE
SENSOR FAUCETS

5EF-1D-WG
5EF-EU1WG-C

5EF-1D-DG
5EF-EU1DG-C

5EF-1D-DS
5EF-EU1DS-C

5EF-2D-DS
5EF-EU4DS-C

Summary of Contents for Equip 5EF-1D-DG
















Reviews: