4
Installation:
See separate instructions for installing
no.
7
into deck.
1. Shut off water supply and drain
lines. Apply te
fl
on tape or pipe joint
compound to threads on both ends of
no.
5
. Screw no.
5
into no.
7
and hand
tighten.
2. Slide no.
6
down no.
5
(about half-
way) and tighten temporarily.
General Instructions
3. Screw no
.
4
down on no
.
5
and hand
tighten, then tighten no.
4
with a wrench,
which will also tighten no.
5
. Make sure
to align no
.
3
with no
.
2
over center of
sink, directly in front of no.
5
while
tightening.
Note: If new no
.
3
is being installed
on no
.
2
, make sure it’s installed in the
upright position.
4. Adjust position of no.
6
so that no.
1
hangs loosely in it without straining
no.
2
or no
.
3
.
5. Turn on water supply and check for
leaks.
See back pages for similar unit
installations.
Caution: Turn off water supply
at base faucet when not in use.
7
5
6
4
7
BOTT
OM
3
2
1
