background image

PRE-RINSE SPRAY VALVE

Limited One Year Warranty

(Commercial Applications)

T&S warrants to the original purchaser (other 

than for purposes of resale) that such product 
is free from defects in material and workman-
ship for a period of one (1) year from the date 
of purchase. During this one-year warranty 
period, if the product is found to be defective, 
T&S shall, at its options, repair and/or replace 
it. To obtain warranty service, products must 
be returned to…

T&S Brass and Bronze Works, Inc.
Attn:  Warranty Repair Department

2 Saddleback Cove

Travelers Rest, SC 29690

Shipping, freight, insurance, and other 

transportation charges of the product to T&S 
and the return of repaired or replaced product 
to the purchaser are the responsibility of the 
purchaser. Repair and/or replacement shall be 
made within a reasonable time after receipt by 
T&S of the returned product. This warranty does 
not cover Items which have received secondary 

fi

 nishing or have been altered or modi

fi

 ed after 

purchase, or for defects caused by physical 
abuse to or misuse of the product, or shipment 
of the products.

Any express warranty not provided herein, 

and any remedy for Breach of Contract which 
might arise, is hereby excluded and disclaimed. 
Any implied warranties of merchantability or 

fi

 tness for a particular purpose are limited in 

duration to the warranty period provided on 
the product. Under no circumstances shall 
T&S be liable for loss of use or any special 
consequential costs, expenses or damages.

Some states do not allow limitations on how 

long and implied warranty lasts or the exclusion 
or limitation of incidental or consequential dam-
ages, so the above limitations or exclusions may 
not apply to you. Speci

fi

 c rights under this war-

ranty and other rights vary from state to state.

Attention California Residents:

“WARNING: This product contains chemicals 

known to the State of California to cause cancer, 
and birth defects or other reproductive harm.” 

 P/N: 

098-011027-45 

Rev.11

 Date: 

06-08-16

 Drawn: 

TEH

 Checked:  DMH 

06-13-16

 Approved:  JHB 06-17-16

Installation and 

Maintenance

Instructions

B-0107
B-0107-C
B-0107-J
B-10K
B-10K-C

EB-0107-J
EB-10K
EB-10K-C
EB-10K-J

B-10K-J
UK-0107
UK-10K
EB-0107
EB-0107-C

Español:

Instrucciones de instalación y mantenimiento

Français:  

Instructions pour l’installation et la maintenance

Deutsch:

Installations- und Wartungsanleitungen

Italiano:

Istruzioni di installazione e manutenzione

中文:

安装与维护说明

Summary of Contents for B-0107












Reviews: