17
2.1
Supply Voltage Selection
Disconnect the PT15-10s from the Mains Supply.
2.1.1
The supply voltage selector is located in the input socket module. The method of
selection is as follows:
a.
Remove fuse drawer .
b.
Remove and rotate fuse carrier until desired supply voltage is seen through
the fuse drawer window.
c.
The PT15-10s is suitable for 2 different supply voltages as follows:
240V or 115V.
d.
Replace fuse drawer once the desired voltage has been selected.
2.1.2
IMPORTANT!
Under no circumstances should the supply voltage selector be altered when the
equipment is energised.
ALWAYS ENSURE THAT THE SUPPLY VOLTAGE SELECTOR IS IN THE
CORRECT VOLTAGE POSITION BEFORE ENERGISING THE EQUIPMENT
