13
1.8
Construction
1.8.1
The unit is housed in a grounded chassis which is completely screened. This chassis
is then housed in the main case which is made from a structurally reinforced plastic.
1.8.2
All accessories are housed in a separate carry bag.
1.8.3
All the controls for the equipment are located on the front panel together with all the
input and output sockets.
1.9
Storage
1.9.1. The PT15-10S when not in use must be stored in a dry environment, corrosion damage
may occur to the HV components if stored in damp environment.
1.9.2.
Important:
If the unit is moved from a cold area to a warmer area condensation could form on the
HV components, this would greatly reduce the internal breakdown voltage.
If it is suspected that condensation may have formed the PT15-10S should not be used
until its temperature has stabilised and any condensation evaporated, this may take
many hours.
