After
Reaching Max
■
Set Up Procedure
1
Connect the serial port of your computer and the main unit through the
standard communication cable. Connect the cable to a serial port
which has the following mark:
CAUTION
●
Make sure to fully insert the connector to secure a proper
connection.
●
Connecting to a wrong port will result in communication
failure.
20
Computer
Communication Cable
D-Sub9 Pin
Female
Connect
Connect
D-Sub9 Pin
Male
(RS-232C)
TR-71S
TR-72S
2
Open "Thermo Recorder for Windows" on your computer and make
settings such as "Start Recording" and other "Recording Conditions".
▼
For more details, see Thermo Recorder for Windows User’s
Manual or the "HELP" menu of the software.
19
One-time
Method
Endless Loop
Method
●
In One Time Method, the display will read [FULL] when it reaches
capacity and recording will stop.
●
In Endless Loop Method, when it reaches capacity the indication will
remain the same but recording will continue
.
Display Amount of Recorded Data
Amount of recorded data stored in the main unit will be displayed on the LCD.
Recording Mode
As Recorded Data Increases
