T&D MCR-4TC, User Manual

Page: 23 / 64

21
Using MCR-4TC
Increasing Recording Channels
Up to four units can be coupled together to allow for a maximum of
16 channels.
When the bodies of multiple units are connected, the MCR-4TC at
the far left side will be automatically designated as the Master and
all other connected MCR-4TC units will be designated as Slaves.
By starting recording on the Master unit, all connected Slave units
will start recording at the same time.
Coupling Image
Turn clockwise.
Slaves
Master
Coupling of MCR-4TC and MCR-4V is possible.
Refer to the MCR-4V User's Manual for its operating instructions.
IMPORTANT
When using MCR-4V as the Master and MCR-4TC as the Slave, Group Recording
cannot be started if the measurement interval of the Master is less than 100ms.