Fig. #17
Fig. #18
Fig. #19
Fig. #20
010410-16 TC54.NG02.C
12. With a 7/16” wrench loosen the pilot head on the pilot assembly
attached to the lower burner assembly (Fig. #17)
13. Slide the pilot adjustment band over and ensure that the hole in
the orifice band is showing. (Fig. #18 indicates NG position, Fig.
#19 indicates LP position)
14. Repeat the conversion on the pilot attached to the upper
burner.
15. Remove access panel, 10 screws, and set aside. (Fig. #20)
7
