232
D14049.04
JULY 2008
Grey Headline
(continued)
Zones LocalZone SubZone [1..100] Bandwidth PerCall Intra Limit: <1..100000000>
Specifies the bandwidth limit (in kbps) for any one call between two endpoints within this subzone (applies only if Mode is set to Limited).
Default: 1920
Example:
Zones LocalZone SubZone 1 Bandwidth PerCall Intra Limit: 1920
Zones LocalZone SubZone [1..100] Bandwidth PerCall Intra Mode: <Limited/Unlimited/NoBandwidth>
Determines whether there is a limit on the bandwidth for any one call between two endpoints within this subzone.
NoBandwidth
: no bandwidth available. No calls can be made within this subzone.
Default: Unlimited
Example:
xConfiguration Zones LocalZone SubZone 1 Bandwidth PerCall Intra Mode: Limited
Zones LocalZone SubZone [1..100] Bandwidth Total Limit: <1..100000000>
Sets the total bandwidth limit (in kbps) of this subzone (applies only if Mode is set to Limited).
Default: 500000
Example:
xConfiguration Zones LocalZone SubZone 1 Bandwidth Total Limit: 500000
Zones LocalZone SubZone [1..100] Bandwidth Total Mode: <Limited/Unlimited/NoBandwidth>
Determines whether this subzone has a limit on the total bandwidth of calls being used by its endpoints at any one time.
NoBandwidth
: no bandwidth available. No calls can be made to, from, or within this subzone.
Default: Unlimited
Example:
xConfiguration Zones LocalZone SubZone 1 Bandwidth Total Mode: Limited
Zones LocalZone SubZone [1..100] Name: <S: 1, 50>
Assigns a name to this subzone.
Example:
xConfiguration Zones LocalZone SubZone 1 Name: "BranchOffice"
Zones LocalZone SubZone [1..100] Subnet [1..5] IP Address: <S: 0, 39>
Specifies an IP Address used (in conjunction with the IP Prefix Length) to identify a subnet to be assigned to this subzone.
Default: 0.0.0.0
Example:
xConfiguration Zones LocalZone SubZone 1 Subnet 1 IP Address: 192.168.0.0
Zones LocalZone SubZone [1..100] Subnet [1..5] IP PrefixLength: <0..128>
Specifies the number of bits of the Subnet IP Address which must match for an IP Address to belong in this subzone.
Default: 32
Example:
xConfiguration Zones LocalZone SubZone 1 Subnet 1 IP PrefixLength: 64
Zones LocalZone Traversal H323 Assent Mode: <On/Off>
Determines whether or not H.323 calls using Assent mode for firewall traversal will be allowed. Applies to traversal-enabled endpoints registered directly with the VCS.
Default: On
Example:
xConfiguration Zones LocalZone Traversal H323 Assent Mode: On
TANDBERG
VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction
Getting Started
Overview and
Status
System
Configuration
VCS
Configuration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Appendices
Applications
Maintenance
Command Reference - xConfiguration