TANDBERG VCS Administration Manual Download Page 130

Page: 130 / 187

D 14049.01
07.2007

TANDBERG

VIDEO COMMUNICATION SERVER

ADMINISTRATOR GUIDE

Text goes here

Introduction

Getting

Started

System

Overview

System

Configuration

H.323 & SIP

Configuration

Registration

Control

Zones and

Neighbors

Call

Processing

Firewall

Traversal

Bandwidth

Control

Maintenance

Appendices

TANDBERG

VIDEO COMMUNICATION SERVER

ADMINISTRATOR GUIDE

Appendices

TANDBERG

VIDEO COMMUNICATION SERVER

ADMINISTRATOR GUIDE

Appendices

Command Reference - xConfiguration

Authentication
cont...

LDAP

AliasOrigin: <LDAP/Endpoint/Combined>

Determines which aliases (i.e. from the endpoint or the database) should be used to register the endpoint.

LDAP

: the alias(es) presented by the endpoint will be used as long as they are listed in the LDAP database for the endpoint’s username.

Endpoint

: the alias(es) presented by the endpoint will be used; any in the LDAP database will be ignored.

Combined

: the alias(es) presented by the endpoint will be used in addition to any that are listed in the LDAP database for the endpoint’s username.

BaseDN: <S: 0, 55>

Specifies the Distinguished Name to use when connecting to an LDAP server.

Mode: <On/Off>

Determines whether or not to enforce authentication for H.323 and SIP registrations.

: authentication is required.

Off

: authentication is not required.

Password: <S: 0, 50>

Specifies the password to be used by the VCS when authenticating with another system.

UserName: <S: 0, 55>

Specifies the username to be used by the VCS when authenticating with another system.

Bandwidth

Default: <64..048>

Sets the bandwidth (in kbps) to be used on calls managed by the VCS in cases where no bandwidth has been specified by the endpoint.

Downspeed

PerCall

Mode: <On/Off>

Determines whether or not the system will attempt to downspeed a call if there is insufficient per-call bandwidth available to fulfil the

request.

: the system will attempt to place the call at a lower bandwidth.

Off

: the call will be rejected.

Total

Mode: <On/Off>

Determines whether or not the system will attempt to downspeed a call if there is insufficient total bandwidth available to fulfill the

request.

: the system will attempt to place the call at a lower bandwidth.

Off

: the call will be rejected.

Summary of Contents for VCS




























































































































































































Search results

Summary of Contents for VCS

Reviews:

Related manuals for VCS

Brands by name

Popular brands

TANDBERG VCS, Administration Manual

Search results

Summary of Contents for VCS

Reviews:

Related manuals for VCS

Brands by name

Popular brands