manualshive.com logo in svg

TANDBERG VCS, Administration Manual

Share
Download
TANDBERG VCS Administration Manual Download Page 131

D 14049.01
07.2007

3

TANDBERG 

VIDEO COMMUNICATION SERVER 

ADMINISTRATOR GUIDE

Text goes here

Introduction

Getting 

Started

System  

Overview

System 

Configuration

H.323 & SIP 

Configuration

Registration 

Control

Zones and 

Neighbors

Call 

 Processing

Firewall  

Traversal

Bandwidth 

Control

Maintenance

Appendices

TANDBERG 

VIDEO COMMUNICATION SERVER 

ADMINISTRATOR GUIDE

Appendices

TANDBERG 

VIDEO COMMUNICATION SERVER 

ADMINISTRATOR GUIDE

Appendices

Command Reference - xConfiguration

Bandwidth 
cont...

Link [..400] 

Name: <S: , 50>

Assigns a name to this link.

Node 

Name: <S: 0, 50>

Specifies the first zone or subzone to which this link will be applied.

Node

Name: <S: 0, 50>

Specifies the second zone or subzone to which this link will be applied.

Pipe 

Name: <S: 0, 50>

Specifies the first pipe to be associated with this link.

Pipe 

Name: <S: 0, 50>

Specifies the second pipe to be associated with this link.

Pipe [..00] 

Bandwidth 

PerCall 

Mode: <None/Limited/Unlimited>

Determines whether or not this pipe is limiting the bandwidth of individual calls. 

None

: no bandwidth will be available.

Limited

: there will be a limit on the bandwidth.

Unlimited

: there will be no limit on the bandwidth.

Limit: <..000000>

If this pipe has limited per-call bandwidth, sets the maximum amount of bandwidth (in kbps) available for any 
one call.

Total 

Mode: <None/Limited/Unlimited>

Determines whether or not this pipe is enforcing total bandwidth restrictions. 

None

: no bandwidth will be available.

Limited

: there will be a limit on the bandwidth.

Unlimited

: there will be no limit on the bandwidth.

Limit: <..000000>

If this pipe has limited bandwidth, sets the maximum bandwidth (in kbps) available at any one time on the pipe.

Name: <S: , 50>

Assigns a name to this pipe.

Summary of Contents for VCS




























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands