TANDBERG TT-1222, Reference Manual

Page: 86 / 132

Technical Specification
Page B-14 Reference Guide: TT1222 4:2:0 Professional Receiver
ST.RE.TT1222.2
B.11.2 EMC
6
The equipment has been designed and tested to meet the following:
EN 55022
and
CISPR22
European
International
Emission Standard
Limits and methods of measurement of
radio frequency interference
characteristics of information
technology equipment - Class A.
EN 61000-3-2
7
European Electromagnetic Compatibility (EMC),
Part 3 Limits; Section 2. Limits for
harmonic current emissions (equipment
input current ≤ 16 A per phase).
EN 61000-3-3
7
European Electromagnetic Compatibility (EMC),
Part 3. Limits; Section 3. Limitation of
voltage fluctuations and flicker in low
voltage supply systems for equipment
with rated current ≤ 16 A.
EN 55024 European Information technology equipment -
Immunity characteristics - Limits and
methods of measurement.
FCC USA Conducted and radiated emission limits
for a Class A digital device, pursuant to
the Code of Federal Regulations (CFR)
Title 47-Telecommunications, Part 15:
Radio frequency devices, subpart B -
Unintentional Radiators.
B.11.3 CE Marking
The CE mark is affixed to indicate compliance with the following
directives:
89/336/EEC of 3 May 1989 on the approximation of the laws of the
Member States relating to electromagnetic compatibility.
73/23/EEC of 19 February 1973 on the harmonisation of the laws of
the Member States relating to electrical equipment designed for use
within certain voltage limits.
1999/5/EC of 9 March 1999 on radio equipment and
telecommunications terminal equipment and the mutual recognition
of their conformity. (If fitted with telecom type interface modules).
NOTE...
The CE mark was first affixed to this product in 2005.
B.11.4 C-Tick Mark
The C-Tick mark is affixed to denote compliance with the Australian
Radiocommunications (Compliance and Labelling – Incidental Emissions)
Notice made under s.182 of the Radiocommunications Act 1992.
6
The EMC tests were performed with the Technical Earth attached, and configured using recommended cables.
7
Applies only to models of the Product using ac power sources.