TANDBERG TT-1222, Reference Manual

Page: 107 / 132

Front Panel LCD Menus
Reference Guide: TT1222 4:2:0 Professional Receiver Page C-19
ST.RE.TT1222.2
C.5.13 Outputs Setup Menu
The number of items available in this menu is dependent on the output
cards fitted inside the receiver. The items that are not standard are
indicated with *.
Table C.21: Output Select Setup Menu
Menu title: SET: OUTPUTS Description Section
Alarms > Enters the alarm setup submenu. C.5.14
GPOs > Enters the GPO setup submenu. C.5.17
RS232 > Enters the RS232 setup submenu. C.5.19
ASI Out > * Enters the ASI output setup submenu (* available only if this option
card is fitted). C.5.24
C.5.14 Alarms Menu
Table C.22: Alarms Menu
Menu title: SET: ALARMS Description Section
Select Alarms > Enters theSelect Alarm submenu. C.5.15
CVBS Output > Enters the CVBS Output submenu. C.5.16
C.5.15 Select Alarms Menu
This menu links to several submenus. The submenus contain all the
configurable alarm parameters. The alarm parameters may be configured
into three levels of severity; alarm (A), warning (W), or ignore (-).
Table C.23: Select Alarms Menu
Menu title: SET: SELECT
ALARMS Description Section
Input > Enters the Input alarms submenu. Annex D
PSI > Enters the PSI alarms submenu. Annex D
CA > Enters the CA alarms submenu. Annex D
Video > Enters the Video alarms submenu. Annex D
VBI > Enters the VBI alarms submenu. Annex D
DVBSubtitle > Enters the DVB subtitle submenu. Annex D
Audio1 > Enters the Audio 1 submenu. Annex D
Audio2 > Enters the Audio 2 submenu. Annex D
Data > Enters the Data output submenu. Annex D
Config > Enters the overall alarm configuration submenu. Annex D
For further information on what the different alarms mean, refer to
Annex D, Alarm Categories and Conditions.