14
TANDBERG Videoconferencing System
Installation
Power on
Power on the monitor and use the monitor remote control to select the Audio/Video input used (refer to your
monitor manual). If you are using S-video from the system (Video Out 1), remember to select S-Video input to
avoid a black and white picture.
Select Audio/Video input on monitor
Selection of Audio/Video input used is generally performed by pressing the
0/AV
button on the TV remote
control several times. Please refer to your monitor user manual for further information.
3. ISDN cables
• CConnect the ISDN cables to the ISDN sockets (S/T-interface) provided by the service provider. Your main
number will be the number associated with the socket to which ISDN cable number 1 is connected.
S
OME
SOFTWARE
VERSIONS
DO
NOT
SUPPORT
THREE
ISDN
LINES
North America:
The TANDBERG 800 does not have a built-in network terminator. If your wall socket provides you with
an ISDN U-interface, you will need an NT1 between your TANDBERG 800 and your ISDN line, see Appendix 1.
W
RITE
DOWN
THE
NUMBERS
ASSOCIATED
WITH
EACH
OF
THE
ISDN
LINES
. Y
OU
WILL
NEED
THEM
LATER
TO
CONFIGURE
THE
SYSTEM
.
C
ONNECTING
TO
THE
S
WITCHED
56
NETWORK
:
W
HEN
CONNECTING
TO
THE
S
WITCHED
56
NETWORK
YOU
MAY
USE
ONE
OF
THE
BRI
INTERFACES
OR
THE
V.35
INTERFACE
ON
THE
TANDBERG 800. P
LEASE
REFER
TO
A
PPENDIX
2
FOR
FURTHER
INFORMATION
.
4. Power cable
• Connect the power cable from the TANDBERG 800 power connector to an electrical distribution socket.
5. LAN cable
• To use the system on LAN, connect a LAN cable from the ‘Ethernet’ connector on the system to your LAN.
NOTE
NOTE
NOTE
