TANDBERG GW
Dataport Command Interface User Guide
D13202 Rev 01
31
4.3. Parameter
Storage
Parameters are set by issuing
Parameter Setting Commands,
ref. chapter 4.1.2
.
All parameters and their corresponding storage type are listed in the table below. The following
definitions are used:
level 0:
No storage (RAM). Does not survive boot or any of the “defvalues” combinations.
level 1:
Normal storage (EEPROM). Survives boot, but none of the “defvalues” combinations.
level 2:
Normal storage (EEPROM). Survives boot and “defvalues set”. Does not survive
“defvalues
set
all”.
level 4:
Survives everything, except software upgrade and “defvalues set factory”.
Command
Storage
directory level
1
gwdid level
2
gwextdialin level
2
gwh323service level
2
gwhotline level
2
gwloadlimit level
2
gwsettings level
2
h323alias level
2
h323gatekeeper level
2
ipaddress level
2
ipassignment level
2
ipmtu level
1
ippassword level
2
ipqos level
2
ipspeed level
2
isdnprot level
2*
netprofile level
2
optionkey level
2
pardial level
1
pricable level
2
prichan level
2
pricrc4 level
2
prinet level
2
protect level
4
sendnum level
1
services level
1
snmp level
2
sport level
2
systemname level
2
*Except sub command sendcomplete: level 1
