TANDBERG GW
Dataport Command Interface User Guide
D13202 Rev 01
22
4.2.3. System Status Commands
Command: Description:
callhistory
Used to list call related information for the last 20 calls.
callhistory [logid]
Status format:
callhistory <logid> <logtag> <gwlogtag> <remote numb.> <call-dir> <chan>
<causecode> <time> <inc. restrict> <outg. restrict> <inc. encrypt. stat> <outg.
encrypt. stat> <gwcallid>
---
Parameters:
•
logid: 1..20.
Id referring to a disconnected call. The last disconnected call
will have id 1.
•
logtag:
Unique number identifying the disconnected call.
•
gwlogtag:
Unique number identifying a GW call.
•
remote numb:
The remote sites ISDN number.
•
call-dir: incoming/outgoing.
•
chan: speech / h323-voip / h221-<chan> / bonding-<chan> / h0-384
,
where
chan
indicates number of B channels.
•
causecode:
Standard ISDN cause code. The cause codes can be used to
find out why the call was disconnected (255 if no valid code).
•
time:
Total calltime in seconds.
•
inc. restrict: restrict / norestrict.
Indicates if the incoming call was
restricted. Restricted calls only utilize 56kb out of an ISDN 64kb channel.
•
outg. restrict: restrict / norestrict.
Indicates if the outgoing call was
restricted.
•
inc. encrypt. stat: off/idle/des/aes128/negotiate.
Indicates incoming
encryption status.
•
outg. encrypt. stat: off/idle/des/aes128/negotiate.
Indicates outgoing
encryption status.
•
gwcallid: 1..16
Example of
callhistory
feedback:
*S callhistory 1 42 1 6090 outgoing bonding-2b 16 39Sec norestrict norestrict off
off 1
callstatus
Returns status of current calls.
callstatus [callid]
Status format:
callstatus <callid> <direction> <type> <status> <cause> <time>
---
Parameters:
•
callid: 1..16/32.
Identifier referring to a call.
•
direction: incoming/outgoing.
•
type: idle / speech / h323-voip / h221 / H0 / bonding
•
status: idle / answering / calling / connected / disconnecting /
disconnected
•
cause:
Standard ISDN cause code. The cause codes can be used to find
out why the call was disconnected (255 if no valid code).
•
time:
connect time in seconds.
Example of
callstatus
feedback:
*S callstatus 1 outgoing bonding connected 255 2446Sec
