EN5990 Encoder for MPEG-4 Part 10
11
3
Operating the Equipment From the Front Panel
3.1 Introduction
The front panel display and keypad may be used to configure, control and monitor
the Encoder when an external control system is not used.
3.2
Establishing Local Control
At power-on the Encoder runs through a boot sequence where the operation of
different modules within the Encoder are checked. The time taken for the unit to
boot is between one and two minutes.
After this process, the Encoder displays the summary screen and the operator can
access the menus from the front-panel or use a web browser once the remote
control IP address has been set correctly.
3.3
Navigating the Menus
3.3.1
Navigation Keys and Buttons
The front panel of the Encoder can be operated according to
operation of the individual keys is described in
Figure 3.1: Keypad and Display Functions
Each softkey on each side of
the display is used to
access, select and
sometimes amend the menu
item associated with it.
Where there is a +/-
sign associated with a
softkey, this scrolls
through a set of
options.
This keypad is used to
amend the menu option
which has been selected
(unless indicated otherwise).
