D14330.09 TANDBERG E20 ADMINISTRATOR GUIDE (TE2.1) February 2010
7
What’s in this Guide?
Introduction
Deploying E20
Using E20
The Settings
Advanced settings
Introduction
Safety Instructions
For your protection please read these safety instructions completely before
you connect the equipment to the power source. Carefully observe all
warnings, precautions and instructions both on the apparatus and in these
operating instructions. Keep this manual for future reference.
Water and Moisture
Do not operate the apparatus under or near water—for example near a
bathtub, kitchen sink, or laundry tub, in a wet basement, near a swimming
pool or in other areas with high humidity.
•
Never install jacks for communication cables in wet locations unless the
jack is specifically designed for wet locations.
•
Do not touch the product with wet hands.
Cleaning
Unplug the apparatus from communication lines, line power-outlet or any
power source before cleaning or polishing. Do not use liquid cleaners or
aerosol cleaners. Use a lint-free cloth lightly moistened with water for
cleaning the exterior of the apparatus.
Ventilation
Do not block any of the ventilation openings of the apparatus. Never cover
the slots and openings with a cloth or other material. Never install the
apparatus near heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
Do not place the product in direct sunlight or close to a surface directly
heated by the sun.
Lightning
Never use this apparatus, or connect/disconnect communication cables or
power cables during lightning storms.
Dust
Do not operate the apparatus in areas with high concentration of dust.
