D14330.09 TANDBERG E20 ADMINISTRATOR GUIDE (TE2.1) February 2010
30
What’s in this Guide?
Introduction
Deploying E20
Using E20
The Settings
Advanced settings
Advanced Settings
Description of the Advanced Settings
On the following pages you will find a list of the settings available to
administrators—known as the Advanced settings.
We recommend you visit the TANDBERG web site regularly for updated
versions of the manual. Go to: http://www.tandberg.com/docs.
To access the Advanced settings, do as follows:
1.
Press the
key to produce the menu. Use the key to navigate
down to
Settings
and press either or use the key to navigate to
the right.
2.
Navigate down to
Advanced.
3.
To navigate further down in the menu hierarchy press either or use
the key to navigate to the right.
4.
To go one or more steps back in the hierarchy, use the key to
navigate to the left, the required number of times.
5.
To collapse all menus, press the
key.
6.
To put a change into effect, press as soon as the required setting
has been selected or changed.
Speed dials
This menu lets you configure up to four speed dials that will be readily
available from the E20 soft keys. Each speed dial can be set up to call a
phone book contact. When you press a configured soft key, the E20 will
call the corresponding contact immediately.
IP settings
This menu lets you
•
Set IP assignment to Static or DHCP
When set to Static, you should also define:
•
IP address
•
Subnet mask
•
Gateway
