TANDBERG Videoconferencing System
41
Advanced use
MCU status line
On
:
The MCU indicators will be displayed and provide information about the conference.
Off
:
The MCU indicators will not be displayed.
Auto
:
The MCU indicators will be displayed for a few seconds and then timed out. When grabbing the remote
control, the indicators will be shown again.
System Name
Identifies the system:
• during an MCU conference call.
• when using the Web-interface.
• when the codec is acting as an SNMP Agent.
• towards a DHCP server.
• as an H323 ID.
Menu Password
Enter the code whch should be entered to get access to the menus on the TANDBERG system. When pressing
the ‘
Menu
’ button on the remote control, the user will be asked to enter the Password written here.
Camera Brightness
To manually adjust the brightness select ‘
Manual
’ and use the arrow keys to adjust.
Welcome Menu
On
:
A ‘Welcome menu’ with useful information on how to use the system will be displayed. See ‘Getting
started’ section.
Off
:
The Welcome menu’ will not be displayed.
Logo:
If a logo is uploaded to the system, it will be shown when this button is selected.
