background image

TANDBERG Videoconferencing System

39

Advanced use

Call quality

The Call Quality menu allows you to select the preferred quality of your call.

D

UE

 

TO

 

ACTIONS

 

OR

 

LIMITATIONS

 

AT

 

THE

 

FAR

 

END

 

YOU

 

MAY

 

NOT

 

ALWAYS

 

BE

 

ABLE

 

TO

 

ACHIEVE

 

THE

 

SELECTIONS

 

YOU

 

WANT

.

Audio

Auto

Optimized audio quality depending on bandwidth.

High

High audio quality (G722) regardless of bandwidth.

Normal

Telephone quality (G728) regardless of bandwidth.

Off

No audio is transmitted.

Video

Auto

Optimized video quality (H.263/H.261).

Normal

Normal video compression and decompression.

H.264

Auto

Optimized video quality depending on what is available.

Off

H.264 video compression and decompression will not be used.

VGA Resolutions

Auto

VGA capabilities (VGA/SVGA/XGA) and SIF capabilities will be transmitted and enabled.

Off

VGA capabilities will not be transmitted. Useful if far end can not handle these capabilities.

SIF 

CAPABILITIES

 

WILL

 

ENABLE

 

BETTER

 

VIDEO

 

QUALITY

 

FOR

 NTSC 

SYSTEMS

 (SIF: 352

X

240, 4SIF: 704

X

480).

A

UTO

1-4 

CHANNELS

:

G722.1 

IS

 

SELECTED

.

OR

 

MORE

 

CHANNELS

: G722 

IS

 

SELECTED

.

NOTE

TIP

TIP

Summary of Contents for D12817-05



















































































Reviews: