Tandberg Data
Installing Your Tandberg DLT VS160 Drive
2-18
Tandberg DLT VS160 Installation and Operations Manual
8.
Secure your DLT VS160 Internal Drive with the
appropriate mounting screws, either in the sides or bottom
of the drive sled, as appropriate for the server or
workstation chassis. Figure 2-11 shows the drive without
the power and SCSI cables attached for clarity.
Figure 2-11: Secure DLT VS160 Internal Drive in Installation
Bay (Side Mounting Screws Shown)
Note:
Some servers and workstations require mounting rails
for internal devices. Contact your server or workstation
manufacturer for information.
9.
Replace the cover on the server or workstation.
10.
Attach the power cables to the server or workstation and all
attached accessories.
11.
Turn on the host server or workstation and allow its
operating system to start.
12.
Refer to page 3-2 to learn about your DLT VS160 Internal
Drive’s self-test and initialization features.
