Tandberg Data DAT 160, User Manual

Page: 53 / 58

Figure 8-1 SCSI termination in internal drives
As long as this terminator is attached, you do not need to take any further
action. However, if you have other devices attached to the cable, make sure
that they have termination removed or disabled.
If you have an internal and external device attached to the
same SCSI bus, the HBA will be in the middle of the cable Note:
and thus its termination must be disabled. See the host
bus adapter's documentation for details of how to do this.
External drives
All DAT external tape drives are supplied with the appropriate cable and
LVD terminators.
Make sure the terminator is firmly attached to the SCSI-OUT connector on
the rear of the device when you install it. Always use the supplied LVD
terminator for proper operation.
53
# August 2009
SCSI termination