Tandberg Data DAT 160, User Manual

Page: 20 / 58

2
1
2. M3 offset mounting screws 1. M3 mounting screws
Figure 2-2 Example, attaching mounting screws
Install drive
Static electricity can damage electronic components.
Always wear an antistatic wriststrap if one is
Caution
available. If not, after you have disconnected power
from the server and removed the cover, touch a bare
metal part of the chassis. Similarly, touch a bare
metal part of the drive before installing it.
Slide the tape drive into the open bay, aligning the tray or rails with the slots
in the bay.
1018931 DAT SCSI Tape Drives
20
Chapter 2–Installing an internal DAT tape drive