Tandberg Data DAT 160, User Manual

Page: 30 / 58

4. Verify that the tape drive installation was successful.
If you encounter a problem during this verification procedure, turn to
“
Troubleshooting ” on page 45 for help in diagnosing and fixing the
problem.
5. For all operating systems ensure that you have downloaded any
upgrades necessary for your backup application. Check
http://
www.tandbergdata.com for software compatibility and install any
recommended upgrades.
6. Carry out a backup and restore test to check that the drive can write
data to tape. Use a blank cartridge.
Native backup applications can be used to check basic tape drive
operation, but they may not support all the advanced features of your
tape drive. We recommend that you upgrade your software application
before running this test.
1018931 DAT SCSI Tape Drives
30
Chapter 4–Verify installation