Tanaka TCM 75EBP, Handling Instructions Manual

Page: 13 / 16

13
TROUBLESHOOTING
Condition Probable Cause Remedy
Engine does not start
No fuel or low fuel Supply fuel
Fuel is not in the carburetor Supply fuel and push priming pump a few times.
Old fuel Supply new fuel
Spark plug is wet
1. Remove spark plug and dry it
2. Pull starter and dry the fuel inside the engine
The fuel pipe is bent or detached Consult a Tanaka dealer
Carburetor failure Consult a Tanaka dealer
Spark plug failure Replace spark plug or correct the gap
Electrical system failure Consult a Tanaka dealer
Engine starts but
immediately stalls
No fuel or low fuel Supply fuel
Fuel is not in the carburetor Supply fuel and push priming pump a few times.
The choke is closed Push choke lever securely
Carburetor failure Consult a Tanaka dealer
Spark plug failure Replace spark plug or correct the gap
Clogged air fi lter Clean the air fi lter
Abnormal vibration
Faulty mounting of the cut-o ff wheel Please refer to “Assembly of cut-o ff wheel”
Deformation of the cut-o ff wheel Replace the cut-o ff wheel
Anti-vibration system failure Consult a Tanaka dealer
Engine starts, but the cut-o ff
wheel does not rotate
Belt is loose
Please refer to “Adjustment of belt”
Belt is too tight
Belt is out of pulleys
Please refer to “Replacing of belt”
Engine does not stop Electrical system failure Consult a Tanaka dealer
REPLACEMENT PARTS
6699872 6699868 6699867 6699877
000Book̲TCM75EAP̲Eng.indb 13 000Book̲TCM75EAP̲Eng.indb 13 2017/12/15 10:55:51 2017/12/15 10:55:51