6
○
Store machine out of the reach of children.
○
Clean and maintain the machine carefully and store it in
a dry place.
○
Make sure stop switch is o
ff
when transporting or storing.
○
Do not store the cut-o
ff
wheels in a wet or frost condition.
Pay special attention about the abrasive wheel.
There is a risk of bursting to using the abrasive wheel
wetted.
If situations occur which are not covered in this manual, take
care and use common sense. Contact Tanaka dealer if you
need assistance.
SPECIFICATIONS
Model
TCM75EAP
TCM75EBP
Engine displacement (cm
3
)
75.0
Spark Plug
NGK BPMR-7A
Max. engine power by ISO 7293 (kW)
3.9
Rated engine speed by ISO 7293 (min
-1
)
9200
Max. engine speed (min
-1
)
9800
Idle engine speed (min
-1
)
2500
Fuel Tank Capacity (L)
1.1
Dry weight (kg)
Without fuel, wheel and accessories
10.4
10.6
Abrasive wheel
Wheel type
Type 41
Outer diameter (mm)
305 (12")
355 (14")
Arbor hole diameter (mm)
20 (25.4 with Adapter collar)
Max. speed (min
-1
)
5100 or more
Max. Thickness (mm)
3.5
4.0
Diamond wheel
Outer diameter (mm)
305 (12")
355 (14")
Arbor hole diameter (mm)
20 (25.4 with Adapter collar)
Max. speed (min
-1
)
5100 or more
Max. Thickness (mm)
3.5
4.0
Minimum
fl
ange outside diameter (mm)
101.7
Wheel-fastener tightening torque (N·m)
20
Spindle diameter (mm)
20 (25.4 with Adapter collar)
Spindle max. speed (min
-1
)
4200
Sound pressure level LpA
*1
(dB(A)) by ISO 19432
Measured / Uncertainty
99.5 / 3.0
Sound power level LwA
*2
(dB(A)) by ISO 19432
Measured / Uncertainty
115 / 3.0
Vibration level (m/s
2
) by ISO 19432
Front handle
*1
/ Rear handle
*1
Uncertainty
2.2 / 2.7
1.0
2.4 / 2.9
1.0
NOTE
Noise level/vibration levels are calculated as the time-
weighted energy total for noise / vibration levels under
various working conditions with the following time
distribution:
*1:
1/7 idle, 6/7 full load.
*2:
Full
load.
All data subject to change without notice.
000Book̲TCM75EAP̲Eng.indb 6
000Book̲TCM75EAP̲Eng.indb 6
2017/12/15 10:55:50
2017/12/15 10:55:50
