- 25 -
6.2.7. Pour Point Detection
※
This step is only applicable to pour point testing modes (“PP” or “PP/CP” displayed in the test
mode field).
When specimen flow is found to have stopped (see Section 2 on page8), the pour point
temperature flashes in the current specimen temperature field (see Figure 17 and see Figure 18)
(
9
)
. The RUN lamp is extinguished and a buzzer sounds intermittently for 8 seconds.
EXP.PP
-25.0
CP
-19.0
-25.0
SAMPLE TEMP
PP/CP
L
1. 0
Fig. 17: Pour Point Detection (Test mode PP/CP)
EXP.PP
-25.0
-25.0
SAMPLE TEMP
PP
L
1. 0
Fig. 18: Pour Point Detection (Test mode PP)
Note (9)
: Measured cloud points and pour points are displayed until either the RESET or START
key is pressed. Upon pressing either the RESET or START keys, the results are cleared
from the display, which returns to normal, and are stored in the last test results fields,
which can be seen in the details screen.
Flashing
Flashing
Flashing
