www.tanakapowerequipment.com
16
Owner’s Manual
AST-210,AST-5000
Maintenance schedule
Below you will find some general maintenance instructions.
For further information please contact your Tanaka service dealer.
Daily maintenance
•
Clean the exterior of the unit.
•
Check that the harness is undamaged.
•
Check the blade guard for damage or cracks. Change the guard in case of impacts or cracks.
•
Make sure the cutting attachment is properly centered, sharp, and without cracks. An off-centered
cutting attachment induces heavy vibrations that may damage the unit.
•
Make sure the cutting attachment nut is sufficiently tightened.
•
Make sure that the blade transport guard is undamaged and that it can be securely fitted.
•
Make sure fasteners are tightened.
Weekly maintenance
•
Check the starter, especially cord and return spring.
•
Clean the exterior of the spark plug.
•
Remove it and check the electrode gap. Adjust it to 0.6 mm, or change the spark plug.
•
Clean the cooling fins on the cylinder and check that the air intake at the starter is not clogged.
•
Make sure the gear case is filled with grease up to ¾ full.
•
Clean the air filter.
Monthly maintenance
•
Rinse the fuel tank with gasoline.
•
Clean the exterior of the carburetor and the space around it.
•
Clean the fan and the space around it.