HANDY TAN
IMPORTANT!
We recommend doing this over a sink or towel.
AIR HOSE
EXTERNAL SOLUTION CUP
Rinse your solution cup with warm water until clean. Wipe all areas dry ready for
the next use.
Please note:
We recommend washing your cup under water, each time you remove
the cup from the handy tan and refill. If you have spilled the contents of the cup
and product gets in the screwband (grooved area of the cup being screwed into the
HandyTan) simply wipe the grooves with Tan.Easy Cleaning Wipes or a wet cloth/
paper towel. This will allow the cup to be easily tightened back onto the Handy.Tan
and cause the cup not to leak excess spray solution.
Wipe the Air Hose daily with Tan.Easy
Cleaning Wipes. Alternatively use a
damp cloth. Once dry, store in a clean
dry place.
1. Remove the hose from the Handy.Tan.
2. Unscrew the cup from the Handy.Tan and empty any
un-used solution from the cup.
3. Rinse the empty solution cup with warm water until clean
and then fill the cup about ¼ full of warm water.
4. Insert the cup and screw tightly, back into the Handy.Tan
and re-connect the hose.
5. Turn on your spray tan machine and adjust your solution
Flow Control dial to the highest setting for maximum
water spraying.
6. Direct the spray applicator into the sink and spray the clean
water through until the cup is empty. This will clean through
the needle and out to the spray-pattern nozzle.
7. Now that the cup is empty, re-set your solution Flow
Control dial on the back of the Handy.Tan to your
regular settings.
8. Disconnect the Handy.Tan from the Air-Hose and unscrew
the cup.
9. Wipe all areas dry including the cup and Handy.Tan ready
for the next use.
IMPORTANT!
You must not submerge the Handy.Tan under water.
If your handy tan has excess spray solution, wipe down with Tan.
Easy Clean Wipes. Alternately you can use a smooth cloth
(avoid anything abrasive) with a general glass cleaner to
maintain the gloss finish.
CLEANING & MAINTENANCE:
SETTING SOLUTION AIR-FLOW CONTROL
The solution Flow Control dial
on the back of the applicator
will determine how much
solution will be dispensed from
the gun. You can adjust the
flow of solution by adjusting
the dial on the handle.
The higher number on your
dial, the more solution will
flow from the Handy.Tan. As
you become more comfortable
with your spray tan techniques,
you can increase the flow of
your solution.
INCREASE
SOLUTION
DECREASE
SOLUTION
MAXIMUM
SOLUTION
FLOW
8
7
6
5
4
3
2
1
MINIMUM
SOLUTION
FLOW
TWIST CONNECT
