background image

IMPORTANT SAFETY PRECAUTIONS

BEFORE USING THIS TAN.EASY PRODUCT, READ ALL INSTRUCTIONS AND CAUTIONARY MARKINGS IN THIS MANUAL 

 

AND ON THE DEVICE.
When using an electrical appliance, basic precautions should always be followed, including the following:

      

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY:

1.   Do not leave product when plugged in. Unplug from outlet when not in use and before servicing.
2.    Do not use outdoors or on wet surfaces.
3.    Do not allow to be used as a toy. Close attention is necessary when used by or near children.
3.    This product is not intended for use by persons (including children) with reduced physical, sensory or mental 

 

 

capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning 

 

 

use of the appliance by a person responsible for their safety. 

4.   Use this device only for its intended function and do not use attachments not recommended by the authorized 

 

 

Tan.Easy Pro Tools manufacturer.

5.    Do not use the device if the cord is damaged. In the event of damage discontinue use immediately. If the supply cord 

 

 

is damaged, it must be replaced by the authorized Tan.Easy manufacturer.

6.   If device is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, do not use, 

 

 

contact Tan.Easy Pro Tools Customer Care via the website or regional telephone number.

7.   Do not pull or carry by cable, use cable as a handle, close a door on cable, or pull cable around sharp edges or 

 

 

corners. Keep cable away from heated surfaces.

8.   Do not unplug by pulling on cable. To unplug, grasp the plug, not the cable.
9.   Do not handle plug with wet hands.
10.  Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything 

 

 

that may reduce air flow. Switch off and unplug the product before attempting to remove any blockage.

11.   Turn off all controls before unplugging.
12.  Do not spray flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
13.  Do not use without the filter in place.
14.  Never look directly into the airflow when device is in use.
15.  Do not use an extension cord unless the cord complies with local regional electrical safety standards
16.  Periodically inspect the power cord for signs of damage

 

SAVE THESE INSTRUCTIONS
This product is intended for professional use only.  

Do not pull 

 

on cable.

Do not submerge 
in water or get 
wet.

Do not use near 
open flames

W A R N I N G   &   S A F E T Y

Summary of Contents for TAN.LITE 32000





















Reviews: