ASSEMBLY
1
2
3
6
5
4
1. Place one middle fan joint
onto the middle support section,
ensure the screw holes are clos-
est to the back. Use two screws
with washers to join the parts.
4. Insert side panels into the side of the fan
and use 8 screws with washers to join the
side panels to the base.
IMPORTANT:
start with the screws at the
front of each panel. Second person should
stabilise fan and side walls whilst attaching
screws.
5. Place the middle section over the
fan and slot over the side panels.
IMPORTANT:
Ensure the switch is on
the right-hand side.
6. Insert the second fan into the back of the
middle section. Insert each of the top side
panels.
IMPORTANT:
One person should hold the fan
in place.
2. Turn over and repeat the
process with the other middle
fan joint.
3.Slot the fan into the base piece.
ON/OFF
