Operation
SPARROWHAWK
standard monitor in OVERSCAN mode, 576i signal at input
standard monitor in ZOOM mode, 576i signal at input
The interface of the monitor
SPARROWHAWK
series is capable to adjust the displayed portion of
the video signal, in case of PAL formats up to 625 TV lines or in case of NTSC formats up to 525 TV li-
nes or in case of 720p formats up to TV lines or in case of 1080i/p formats up to 1150 TV lines.
In NORMAL mode the full active area will be displayed.
In UNDERSCAN mode the total video signal, even the sync area, will be displayed.
In OVERSCAN mode the video will be cropped to 95% of the active area.
In ZOOM mode the video will be stretched or squeezed to an individual size. See ZOOM setup menu
for selected values. Default is zoom factor 2.00.
Note:
In UNDERSCAN mode even the sync area will be displayed. This makes a H/V shift or
delay mode obsolete.
R/G/B Switch
Corresponding to the operation keys at a normal monitor use the IR-remote keys to operate the
SPARROWHAWK
series monitors. Using the button
DOWN
when the main menu is not active, you
may toggle between the single color modes of the
SPARROWHAWK
series monitors.
If the
PLUS
button is pushed once, the displayed color of the image can be selected between the
NORMAL – RED – GREEN - BLUE mode (see image below).
standard monitor in NORMAL color mode, 576i signal at input
standard monitor in RED color mode, 576i signal at input
© 02.07 TAMUZ - LCD Video Monitors
LSM Digital Broadcast Monitor
Page - 35 -
