MagicView UVC-500 v1.03
User Guide
10
3. Hardware installation
(1) After installing the MagicView UVC-500 driver and viewer program, connect the USB
cable of the Document Camera to the USB port at the front or the rear of your PC.
(2) There is no need to install any special drivers to use MagicView UVC-500. After connecting
the USB cable of MagicView UVC-500 to a PC's USB port, wait a few seconds, a message
appears as "Your device is ready to use."
MagicView UVC-500 document camera can only be
used in USB 2.0 mode. Check if the PC supports
USB 2.0
PC
의 후면에
설치되어 있는
USB
단자
USB ports at the
rear of the PC
Note
II_Installation