Van ’t Hoffstraat 12
2665 JL Bleiswijk, The Netherlands
T. 31 (0) 10 522 43 73
E-mail: [email protected]
Website: www.tamson.com
Tamson Instruments bv
Page 6/20
tc16-40-58-man.docx Rev. 2.4 UK 9-21
ISO 9001 : 2015
NL/PRO 238239125
VAT: NL 80 66 34 984 B01
Bank account no.:
NL28 INGB 0007 350 370
NL95 RABO 0160100046
Chamber of commerce 27 16 95 41
For working temperatures above +80°C a fluid with a high
boiling point must be used. The bath fluid also has to be
chemically stable and must have low viscosity preventing
damage to the pump. Tamson oil type 150 has these
characteristics and is recommended to use for
temperature ranges which lie between +80°C and
+150°C.
Silicon oil can be used for temperatures b20°C
and +150°C.
It is very important to select a liquid with a viscosity of less
than 20 mm²/s at the operating temperature and a flash
point which is well above the operating temperature.
When viscosity of the bath fluid is too high at room
temperature, the motor-fuse will be activated. In such a
case the bath fluid can first be heated to set point
temperature. When the bath has reached it’s set point the
motor fuse can be reset by pressing it. This way of
operating will reduce the life of the motor and is thus not
recommended.
Type
Remarks
Life
Viscosity [mm²/s]
X
Temp.
Range
Package
Ordering
code
150°C
200°C
250°C
80°C 100°C 150°C 200°
C
Mineral
T150
Yellow
Mineral oil
1/2 yr
X
X
20
7
3
80..150°
C
20 ltrs
00T0220
Silicon
200 -10
Transparent
Dimethyl siloxane
polymer
No limit 200hrs <10hrs
4
3.5
2.5
20..150°
C
20 ltrs
08T0001
Silicon
200 -50
Transparent
Dimethyl siloxane
polymer
No limit 200hrs <10hrs
20
15
9
80..150°
C
20 ltrs 00T0226
Silicon
Silicon 210
Dark
Dimethyl poly
siloxane
No limit
<2yrs
<1yr
(35)
30
22
12
80..250°
C
20 ltrs 00T0231
Silicon
Silicon 550
Colorless
Polyphenyl methyl
dimethyl siloxane
No limit
<1yr
<1200
hrs
(50)
20
12
5
80..250°
C
20 ltrs 00T0238
FLASH POINT
> OPERATING
TEMPERATURE
VISCOSITY
< 20 mm²/s
PRESS
BUTTON TO
RESET MOTOR
FUSE
