Configuring the Card in Windows NT4.0 / 2000 / XP
1. Make sure that the HP/Agilent SICL software package, TAMS 61622 card(s)
and the t61622 driver are installed and the computer rebooted.
2. Configure the interface by executing the IO Config program, which will now be
located in the SICL/bin subdirectory. You should also have a shortcut under Start-
> Programs-> Agilent IO Libraries
Note:
Configuration of TAMS 61622 interface assumes knowledge of SICL
configuration procedures specific to the platform. Refer to SICL documentation.
If the Agilent IO Libraries were installed using the default values the SICL\bin
subdirectory will be found here:
Window NT: C:\SICLNT\bin or C:\SICL\bin\
Windows 2000 / XP: C:\Program Files\Agilent\IO Libraries\bin\
Upon execution, the IO Config program will present a window like this:
15
