English
LD-G-33 / LD-W-33
Page 24
Name of CVs /
Registers
CV-
no.
Reg.
no.
Input value
(Default)
Remarks and Tips
Extended
address
17
04
192 ... 255
(192)
18
05
0 ... 255
(255)
Only for DCC format. Most
central units permit entering
extended addresses directly.
The CVs # 17, 18 and 29 are
set automatically to the proper
values.
Consistadresse 19
06
1 ... 127
(0)
= 2nd adress
In DCC format only!
Numerical value*
27 49 0, 16, 32,
48
(0)
No braking
with d.c. voltage
0
Braking with
positive d.c. voltage
16
Braking
prformance
with d.c.
voltage
Braking with
negative d.c. voltage
32
Tip: It is standard to switch over into analogue mode when applying a d.c.
voltage at the rails. In case that the decoder is run in a layout with a braking
route based on applying a d.c. voltage (e.g. Märklin**-braking route), the
locomotive has to be prevented from changing over into analogue mode and it
has to be ensured that the locomotive reacts as expected on the braking route.
When braking with positive or negative d.c. voltage is set for the decoder, the
analogue recognition is switched off automatically.
The setting of the negative or positive d.c. voltage is related to the right rail, as
seen in the locomotive´s direction of motion.