LD-G-33 / LD-W-33
English
Page 19
current address). Manufacturers setting is "3". Set all functions (function,
f1 to f4) to "off".
Push the "stop" button at the central unit. Next, operate the direction
switch and hold it in that position while briefly pushing the "go" button.
As soon as the lamps connected to the outputs AUX1 or AUX2 flash
(after approx. 2 seconds) the decoder is in the programming mode and
you an release the direction switch.
Switch on the central unit or
perform a reset at the central unit.
Starting the programming mode
Push button „stop“
à
Switch off the track voltage.
Set the current address or address 80.
Set all functions to "off".
Start register-programming
(lighting flashes)
Operate the direction switch and hold it in
that position. Briefly push the button „go“.
As soon as the lighting flashes,
release the direction switch.