print is properly aligned onto the board.
c. For cold mounting only using self stick boards that have liners, care and precision must be
exercised as this has a tendency to produce wrinkles and/or uneven positioning when the print is
not properly set. There is no need for film to be threaded onto the machine and it is
recommended to set temperature at 50°C (122°F) on the top roller for best results. Simply
remove the liner from the board, carefully and evenly align the print and set it onto the adhesive
side. The pressure applied by the rollers will enhance adhesion of the print onto the board.
Please refer to instructions on how to apply prints on these types of boards that come with
their packaging or consult with the mounting board supplier.
2. Once the machine is hot enough and ready to laminate, push the handle to DOWN position and put
the motor switch to RUN position.
3. Feed materials between the engaged rollers.
4. Put the motor switch in “STOP” position to stop the feeding when the board is all the way out in the
back.
MOUNTING WITHOUT LAMINATION