B. TEMPERATURE CONVERSION
This machine can display temperatures in either Celsius or Fahrenheit. To change to either one, simply
press and hold the “TEMP/SET” arrow keys simultaneously.
C. GUIDE PLATES
This machine is equipped with guide plates on the left and right sides of the feed tray for proper
alignment of materials to be laminated. Aside from being able to laminate 27" wide sheets one at a time,
the user can also laminate up to two (2) 8.5"x11" prints simultaneously in either orientation by aligning
them on each of the plates on both sides of the tray.
D. REVERSE FUNCTION
The machine is equipped with a reverse function. By pressing the “REVERSE” key, the machine will
release the documents out from the front of the machine to prevent any jam or damage.
E. MOUNTING FUNCTION
1. This machine is equipped with a mounting function. The user can choose to mount prints or posters
using up to 1/4” thick foam boards.
a. For mounting and encapsulating using thermal film, simply set the machine up for
2-SIDED
LAMINATION
. Line up the material evenly on a standard foam board and set the temperature
on the machine.
b. For simultaneous mounting with 1-sided lamination using nylon, BOPP or even thermal film, set
the machine up for
1-SIDED LAMINATION
. Turn the bottom roller heater switch to the “off”
position. Adjust the temperature based on the thickness of the top roller film and make sure the
