9
4 TURNING OFF THE LAMINATOR
Upon completion of the laminating job, please press the “COLD” key to turn off the heat and make
sure the motor switch is in “STOP” position. We recommend turning off the machine only after the
roller temperature is lower than 80°C (176°F) to protect the heated rollers. Make sure the rear fans are
also turned off.
In case you need to turn the machine off while the roller temperature is higher than 80°C (176°F),
simply make sure the rollers are separated/not engaged with the handle in UP position before turning
the power switch off.
5 CARE AND CLEANING
This machine is for Office or Household use only. Any servicing, other than cleaning and user
maintenance, should be performed by an authorized service representative.
1.
Do not immerse in water.
2.
To reduce the risk of fire or electric shock, do not remove the machine’s 4 rubber foot pads.
3.
Keep your hands and cord away from hot parts of the machine during operation.
4.
Never clean with scouring powders or hand implements.
5.
Wipe clean with a soft cloth.
MOUNTING WITH LAMINATION
