background image

Tamas Hydronic Systems Inc. 

Page 11

Limited Warranty

Tamas Hydronic Systems Inc. warrants each of its products to be free from defects in workmanship and materials 

under normal use and service for a period of 24 months from date of purchase from a Tamas Hydronic Systems inc. 

authorized Dealer.

If the product proves to be defective within the applicable warranty period, Tamas Hydronic Systems inc. on its 

sole discretion will repair or replace said product.  Replacement product may be new or refurbished of equivalent 

or better specifications, relative to the defective product.  Replacement product need not be of identical design or 

model.  Any repair or replacement product pursuant to this warranty shall be warranted for not less than 90 days 

from date of such repair, irrespective of any earlier expiration of original warranty period.  When Tamas Hydronic 

Systems Inc.  Provides replacement, the defective product becomes the property of Tamas Hydronic Systems Inc. 

Warranty Service, within the applicable warranty period, may be obtained by contacting your nearest Tamas 

Hydronics Systems inc. office via the original Authorized Agent and requesting a Return Material Authorization 

Number (RMA #).  Proof of purchase in the form a dated invoice/receipt must be provided to expedite the issuance 

of a Factory RMA.

After an RMA number has been issued, the defective product must be packaged securely in the original or other 

suitable shipping package to ensure that it will not be damaged in transit.  The RMA number must be visible on the 

outside of the package and a copy included inside the package.  The package must be mailed or otherwise shipped 

back to Tamas Hydronic Systems Inc. with all costs of mailing/shipping/insurance prepaid by the warranty claimant.

Any package/s returned to Tamas Hydronic Systems Inc. without an approved and visible RMA number will 

be rejected and shipped back to purchaser at purchaser’s expense. Tamas Hydronic Systems Inc.   Reserves the 

right, if deemed necessary, to charge a reasonable levy for costs incurred, additional to mailing or shipping costs.

Limitation of Warranties.

If the Tamas Hydronic Systems Inc. product does not operate as warranted above the purchasers sole remedy shall 

be, at Tamas Hydronic Systems option, repair or replacement.  The foregoing warranties and remedies are exclusive 

and in lieu of all other warranties, expressed or implied, either in fact or by operation of law, statutory or otherwise, 

including warranties of merchantability and fitness for a particular purpose/application. Tamas Hydronic Systems 

Inc. neither assumes nor authorizes any other person to assume for it any other liability in connection with the sale, 

installation maintenance or use of Tamas Hydronic Systems Inc. products.

Tamas Hydronic Systems Inc. shall not be liable under this warranty; if its testing and examination discloses 

that the alleged defect in the product does not exist or was caused by the purchasers or third persons misuse, 

neglect, improper installation or testing, unauthorized attempts to repair or any other cause beyond the range of 
intended use, or by accident, fire, lightning or other hazard.     

Limitation of Liability.

In no event will Tamas Hydronic Systems Inc.  be liable for any damages, including loss of data, loss of profits, 

costs of cover or other incidental, consequential or indirect damages arising out of the installation, maintenance, 

commissioning, performance, failure or interruption of a Tamas Hydronic Systems Inc. product, however caused 

and on any theory of liability.  This limitation will apply even if Tamas Hydronic Systems Inc.  has been advised of the 
possibility of such damage. 

       

Local Law.

This limited warranty statement gives the purchaser specific legal rights.  The purchaser may also have other rights 

which vary from state to state in the United States, from Province to Province in Canada and from Country to 

Country elsewhere in the world.

To the extent this Limited Warranty Statement is inconsistent with local law, this statement shall be deemed 

modified to be consistent with such local law.  Under such local law, certain disclaimers and limitations of this 

statement may not apply to the purchaser.  For example, some states in the United States, as well as some 

governments outside the United States (including Canadian Provinces), may:

 

Preclude the disclaimers and limitations in this statement from limiting the statutory rights of a consumer (e.g. 

United Kingdom);

 

Otherwise restrict the ability of a manufacturer to enforce such disclaimers or limitations; or  

Grant the purchaser additional warranty rights which the manufacturer cannot disclaim, or not allow limitations on 
the duration of implied warranties.

Summary of Contents for Z-Block













Reviews: